How to Install Retractable Awning?

Let's Explore!

Choose the Right Location

Ensure the installation spot is free from obstructions like wires and pipes. Dimensions: Measure the width and projection needed, typically ranging from 8 to 20 feet wide and 7 to 10 feet projection.

Gather the Required Tools

Basic tools: Drill, level, tape measure, and socket wrench. Accessories: Mounting brackets, bolts, and safety goggles.

Mark the Installation Points

Mark the desired height for the awning on the wall. Most awnings are installed at a height of 8 to 12 feet to allow enough head clearance.

Install the Mounting Brackets

Securely attach the brackets to the wall or roof using heavy-duty bolts. Ensure they are level and spaced according to the awning's dimensions (typically 3-5 feet apart depending on size).

Attach the Awning Frame

Lift and fit the awning frame into the mounting brackets.  Use a helper for larger awnings (e.g., those over 12 feet wide) to ensure safe handling.

Secure the Awning

Tighten the frame into the brackets using a socket wrench. Accessories: Additional support arms may be needed for projections over 10 feet.

Adjust the Angle

Set the angle of the awning to allow water runoff. A common slope is around 15-30 degrees. Dimensions: Ensure a slight downward slope of about 3 inches per foot.

Install the Awning Fabric

Attach the fabric or cover securely to the frame, ensuring it’s evenly stretched. Accessories: Use tensioning clips or fabric fasteners for added stability.

Test the Operation

Extend and retract the awning to check for smooth functioning. Ensure that it moves without obstructions or jerks. For motorized awnings, connect the power supply and test the remote control.

Finish and Safety Check

Inspect all bolts and brackets to confirm they are tightly secured. Accessories: Consider installing wind sensors or a protective cover for the awning to improve durability.